EBM-PAPST 220mm EC Centrifugal Module-RadiCal
Item No. 130-K3G220-RD53-03
Loading
Ebm-Papst K3G220-RD53-03 Technical Features: Mass 2.1 kg Size 220 mm Surface of rotor Thick layer passivated Material of electronics housing Die-cast aluminium Material of impeller PA plastic, galvanised round sheet-metal plate Housing material PA plastic Number of blades 7 Direction of rotation Clo
Description
Ebm-Papst K3G220-RD53-03 Technical Features:
- Mass 2.1 kg
- Size 220 mm
- Surface of rotor Thick layer passivated
- Material of electronics housing Die-cast aluminium
- Material of impeller PA plastic, galvanised round sheet-metal plate
- Housing material PA plastic
- Number of blades 7
- Direction of rotation Clockwise, seen on rotor
- Type of protection IP 54
- Insulation class “B”
- Max. permissible ambient motor temp. (transp./ storage) + 80 °C
- Min. permissible ambient motor temp. (transp./storage) – 40 °C
- Mounting position Any
- Condensate discharge holes None, open rotor
- Operation mode S1
- Motor bearing Ball bearing
- Technical features
- – Output 10 VDC, max. 1.1 mA
- – Tach output
- – Motor current limit
- – Soft start
- – Control input 0-10 VDC / PWM
- – Over-temperature protected electronics / motor
- – Line undervoltage detection
- Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) <= 3.5 mA
- Motor protection Locked-rotor protection
- Cable exit Variable
- Protection class I (if protective earth is connected by customer)
- Product conforming to standard EN 60335-1; CE
Specifications
- Blade Material
- Plastic
- Blade Max Temp. (C )
- 80 deg C
- Blade Min. Temp. (C )
- -40 deg C
- Fan Blade Diameter (MM)
- 270 mm
- Fan Type
- Backward Curve
- Hz
- 50
- Ingress Protection
- IP54
- Maximum Amps
- 1.4
- Motor Type
- EC
- Phase
- 1
- Voltage
- 230
- Description
- EBM-PAPST 220mm EC Centrifugal Module-RadiCal
Loading
EBM-PAPST 220mm EC Centrifugal Module-RadiCal
Item No. 130-K3G220-RD53-03
Ebm-Papst K3G220-RD53-03 Technical Features: Mass 2.1 kg Size 220 mm Surface of rotor Thick layer passivated Material of electronics housing Die-cast aluminium Material of impeller PA plastic, galvanised round sheet-metal plate Housing material PA plastic Number of blades 7 Direction of rotation Clo
Specifications
- Blade Material
- Plastic
- Blade Max Temp. (C )
- 80 deg C
- Blade Min. Temp. (C )
- -40 deg C
- Fan Blade Diameter (MM)
- 270 mm
- Fan Type
- Backward Curve
- Hz
- 50
- Ingress Protection
- IP54
- Maximum Amps
- 1.4
- Motor Type
- EC
- Phase
- 1
- Voltage
- 230
- Description
- EBM-PAPST 220mm EC Centrifugal Module-RadiCal
Description
Ebm-Papst K3G220-RD53-03 Technical Features:
- Mass 2.1 kg
- Size 220 mm
- Surface of rotor Thick layer passivated
- Material of electronics housing Die-cast aluminium
- Material of impeller PA plastic, galvanised round sheet-metal plate
- Housing material PA plastic
- Number of blades 7
- Direction of rotation Clockwise, seen on rotor
- Type of protection IP 54
- Insulation class “B”
- Max. permissible ambient motor temp. (transp./ storage) + 80 °C
- Min. permissible ambient motor temp. (transp./storage) – 40 °C
- Mounting position Any
- Condensate discharge holes None, open rotor
- Operation mode S1
- Motor bearing Ball bearing
- Technical features
- – Output 10 VDC, max. 1.1 mA
- – Tach output
- – Motor current limit
- – Soft start
- – Control input 0-10 VDC / PWM
- – Over-temperature protected electronics / motor
- – Line undervoltage detection
- Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) <= 3.5 mA
- Motor protection Locked-rotor protection
- Cable exit Variable
- Protection class I (if protective earth is connected by customer)
- Product conforming to standard EN 60335-1; CE