The range of Onga LTP Lesuiretime swimming pool pumps has been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.

• Ideal for small to medium domestic swimming pools and solar pool heating.
• 2 year warranty

Applications:

• Swimming pools from 20,000 litres up to 90,000 litres.
• Solar heating circuits.
• Above ground pools.

Features & Benefits

• IP55 (TEFC) motor – with IP55 protection from dust and water the LTP pumps are preserved
• Electrical approvals-the LTP series pool pumps have passed all stringent Australian standards AS/ NZS3136:2001 for safety and is approved for installation within the wetted zone of the pool area, approvals V99108, V02301, V02302.

Operating Conditions
Suitable for pumping clean non-aggressive liquids without solids or fibers in suspension.

Fluid	Water
Maximum working pressure	270 kPa
Water (Swimming Pool) temp range	5ºC-35ºC
Ambient temperature	50ºC maximum

 

MOTOR
Type	TEFC 2 pole continuously rotated
Nominal speed	2800 rpm
IP rating	IP55
Insulation class	Class F
Thermal overload	Inbuilt auto reset
Temperature rise	Class B
Frequency	50Hz
Voltage	230º-240º
Bearing type	Deep groove ball bearing with double contact lip seal
Bearing temperature rating	150ºC

 

MATERIAL
Component	Material
Pump casing	20% glass filled with ABS
Clacker	20% glass filled with polycarbonate
Impeller	20% glass filled with ABS
Baffle	20% glass filled with ABS
Drain plug	20% glass filled with ABS
Diffuser	20% glass filled with ABS
Basket	Polypropylene
Shaft sleeve	Nylon
Motor shaft	400 series stainless steel
End shield	Powder coated cast iron
Hair and lint pot O-ring	Low friction nitrile
Cord/Plug	Nitrile
Mechanical seal, 1/2″ type 6 (LTP1100 = type 6 3/4″
Flexible bellows	Nitrile
Stationary face	Ceramic
Rotating face	Carbon
Spring	304 stainless steel

 

Pump Model	A	B	C	D	E	F
LTP400	556	454	91	152	254	260
LTP550	578	454	91	152	254	260
LTP750	578	454	91	152	254	260
LTP1100	587	448	91	152	254	260

Note: Dimension ‘E’ an additional 160mm clearance height required above the pump to remove strainerbasket for maintenance and cleaning purposes. Unless otherwise specified, all dimensions in mm.Fixing holes accept 8mm fasteners.